How to remove Chery steering wheel
Recently, car repair and DIY modification have become one of the hot topics, and many car owners are interested in how to remove the steering wheel. This article will introduce in detail the steps to disassemble the Chery steering wheel, and provide hot topics and hot content on the Internet in the past 10 days for readers' reference.
1. Hot topics on the Internet in the past 10 days

| hot topics | heat index | Main discussion content |
|---|---|---|
| New energy vehicle subsidy policy | 95 | Adjustments and impacts of new energy vehicle subsidy policies in various regions |
| Car DIY modification | 88 | Steering wheel, seat and other car parts modification tutorial |
| Intelligent driving technology | 85 | L3 level autonomous driving technology progress and controversy |
| Oil price fluctuations | 80 | The impact of changes in international oil prices on domestic oil prices |
2. Chery steering wheel disassembly steps
Removing the steering wheel requires certain tools and skills. Here are the detailed steps:
1. Preparation
Make sure the vehicle is turned off and the negative battery terminal is disconnected to avoid accidentally triggering the airbag. Prepare the following tools:
| Tool name | Purpose |
|---|---|
| Screwdriver (cross/slotted) | Remove the steering wheel fixing screws |
| wrench | Loosen the steering wheel retaining nut |
| steering wheel puller | Assisted removal of steering wheel |
2. Disassembly steps
Step 1: Remove the airbag
There are usually airbag fixing screws on the back of the steering wheel. Use a screwdriver to unscrew them. Carefully remove the airbag module and disconnect the cables.
Step 2: Loosen the steering wheel retaining nut
Use a wrench to loosen the retaining nut in the center of the steering wheel, but do not remove it completely, leaving a few turns in case the steering wheel suddenly falls off.
Step 3: Use a puller to remove the steering wheel
Secure the puller to the steering wheel and slowly tighten the puller screw until the steering wheel separates from the steering column. Finally, remove the retaining nut to complete disassembly.
3. Precautions
1. Avoid using excessive force during disassembly to avoid damaging the steering wheel or steering column.
2. The airbag module must be handled with care to avoid collision or static electricity.
3. It is recommended to mark the relative position of the steering wheel and steering column before disassembly to facilitate alignment during installation.
4. Recommendations for recent hot car repair tools
| Tool name | price range | Popular models |
|---|---|---|
| steering wheel puller | 50-200 yuan | OTC 4567 |
| Multifunctional wrench set | 100-500 yuan | Stanley 65-112 |
| car diagnostic instrument | 300-2000 yuan | Autel MaxiCOM MK808 |
With the above steps and tools, you can successfully complete the Chery steering wheel disassembly work. For further assistance, it is recommended to consult a professional technician or refer to the vehicle service manual.
check the details
check the details